Atec Agilent-8563E - Manual (Page 46)

ESG Family Signal Generators Service Software
Running the Service Support Software
Calibration Guide 3-25
2. Once you have selected the drive, folder, and assigned a file name, select the OK button
to save these settings for when the tests are complete.
Running the Tests and Adjustments
Once the HP Service Support Software window is displayed:
1. Select the Run button to start the automated tests or adjustments displayed in the
Selected Tests box.
The software steps through the tests or adjustments sequentially.
2. Follow the instructions displayed on the PC.
A description for each automated performance test or adjustment can be found in
Chapter 4, “Performance Tests,” and Chapter 5, “Adjustments.”