Atec Agilent-8563E - Manual (Page 24)

ESG Family Signal Generators Service Software
Installing the ESG_B or ESG_APDP Service Software
Calibration Guide 3-3
Installing the ESG_B or ESG_APDP Service Software
NOTE If you are installing the ESG_B or ESG_APDP Service Software onto a
computer which already has service software older than version A.03.00, you
must first remove the old version before installing the new software.
Follow this procedure to install the ESG_B or ESG_APDP Service Software on your
personal computer.
1. Insert “Disk 1” into the disk drive.
2. To display the Run dialog box:
• For MS Windows 95 or Windows NT: Select the Start button, then select Run ... from
the pop-up menu.
• For MS Windows version 3.x: Open the Program Manager, then select Run ... from
the File drop-down menu.
3. From the Run dialog box, type a:setup and select the OK button.
The Setup window is displayed as it loads files for the installation. Once these files are
loaded, the ESG Service Software’s Welcome screen is displayed.
4. Continue with the setup by selecting the Next button.
5. The ESG Service Software’s Important Information window is displayed. It contains
information that is vital to installing and using the software. In addition, any new
information may also be shown on this screen. Stop and read this information before
continuing with the software installation!
6. Continue with the setup by selecting the Next button.
The Choose Destination Location window is displayed. The default location for
installing the software is C:\HP_SVC\ESG_B (or C:\HP_SVC\ESG_APDP). Use this
as the software’s destination folder.
7. Continue with the setup by selecting the Next button.
The ESG Service Software’s Select Program Folder window is displayed. This
installation procedure will install the service software icons into a program folder. You
can enter a new folder name in the Program Folders text field or select a folder from the
Existing Folders field. It is recommended to use “ESG_B Service Software” (or
“ESG_APDP Service Software”) for the folder name.
NOTE This documentation refers to the folder name as “ESG_B Service Software.” If
you use another name for the folder, be aware of this difference.