beautypg.com

Atec Agilent-N4010A User Manual

Data sheet n4010a introduction

background image

Agilent

N4010A Wireless Connectivity Test Set

and N4011A MIMO/Multi-port Adapter

Data Sheet

N4010A Introduction

The Agilent N4010A wireless connectivity test set is a

measurement solution that enables efficient and lower

cost test for products and components that incorporate

Bluetooth

®

wireless technology, Wireless LAN (WLAN),

and other emerging wireless connectivity technologies.

The Bluetooth (N4010A Option 101) feature set provides

the ability to connect to Bluetooth version 1.1 and 1.2

devices in either test mode or normal mode, and make

measurements in accordance with the Bluetooth RF test

specification. Bluetooth EDR link plus measurements

(Option 107) add BTv2.0+EDR support and enhanced data

rate (EDR) measurement capabilities.

Bluetooth audio generation and analysis (Option 113),

simplifies Bluetooth audio test configurations and provides

cost-effective functional test of Bluetooth audio devices

by performing a basic set of audio measurements. Headset

profile (Option 112) enables testing of Bluetooth voice

channels, audio gateway, and headset products.

The N4017A Bluetooth

®

graphical measurement application,

a PC-based software product, works in a complementary

manner with the N4010A test set and provides the ability

to fully configure the test set and display

both numerical and graphical results.

The Wireless LAN feature set (N4010A Option 102/102)

combines a fully-calibrated vector signal generator and

wide bandwidth signal analyzer into a single test set,

which enables efficient and repeatable WLAN module

test from R&D through to production. N4010A Option 108

provides the software license for the 802.11n MIMO

modulation analysis measurements within the test set.

The N4010A test set also works with the Agilent 89601A

and 89607A vector signal analyzer software. This software

provides the flexibility to make a broad range of measure-

ments for evaluating wireless formats in the 2.4 GHz or

5 GHz band, including ZigBee/IEEE 802.15.4.

The test set will meet its warranted performance after

one hour within the stated environmental operating range

plus 40 minutes after turn on. Unless otherwise stated, all

specifications are valid over the temperature range 20 to

30 °C. Supplemental characteristics are intended to provide

additional information, useful in applying the instrument by

giving typical (expected), but not warranted, performance

parameters. These characteristics are shown in italics or

labeled as nominal.