Atec Agilent-8563E - Manual (Page 38)

ESG Family Signal Generators Service Software
ESG Family Support Software Administration
Calibration Guide 3-17
Removing Test Drivers
Removing test drivers is accomplished using the Test Drivers dialog box. Refer to
Figure 3-13 .
1. Select the driver ( .dll ) file to be removed.
Figure 3-13 Removing a Test Driver Using the Test Drivers Window
2. Ensure that the information displayed in the Version, Required Devices, and Tests
Supported fields reflects the correct information for the selected driver being removed.
3. Click Remove.
4. Click Close.
Adding Datapacks
Adding datapacks for test procedures is accomplished using the Datapacks dialog box.
1. Refer to Figure 3-14 . In the File drop-down menu, select Datapacks.