Atec Agilent-8563E - Manual (Page 35)

Service Software ESG Family Signal Generators
ESG Family Support Software Administration
3-14 Calibration Guide
Removing Device Drivers
Removing device drivers is accomplished using the Test Equipment Drivers dialog box.
Refer to
Figure 3-9 .
1. Select the driver (.dll) file to be removed.
Figure 3-9 Removing a Device Driver Using the Test Equipment Drivers
Window
2. Ensure that the information displayed in the Version, Device Type, and Models
Supported fields reflects the correct information for the selected driver being removed.
3. Click Remove.
4. Click Close.
Adding Test Drivers
Adding software drivers is accomplished using the Test Drivers window.
1. Refer to Figure 3-10 . In the File drop-down menu, select Test Drivers.