Atec Agilent-8563E - Manual (Page 27)

Service Software ESG Family Signal Generators
ESG Family Support Software Administration
3-6 Calibration Guide
ESG Family Support Software Administration
The following section shows you how to administer and run the ESG Family Support
Software. The software’s administrative functions allow for the addition or removal of all
necessary test equipment, software drivers, and test procedures. This would include
additional software drivers (as they are released) to extend the range of tests and
equipment supported by the ESG family test set, or maintenance releases of the current
drivers.
Software Configuration
Follow the instructions below to configure the software to run in either User Mode or
Administration Mode.
Start the software using the steps appropriate for the version of MS Windows that is
installed on your PC.
• For MS Windows version 3.x:
1. Open the Program Manager window.
2. Open the HP Service Support program group.
3. Open the HP Service Software icon.
• For MS Windows 95 or Windows NT:
1. Select Start.
2. Select HP Service Software for PC’s.
3. Select HP Service Software.
The service support software has two configurations: User and Administration. The
following sections explain the difference between the two configurations.
Figure 3-1 The User Information Window