I/q impairment adjustment, Description, Required test equipment – Atec Agilent-8563E User Manual

Page 139: Procedure, I/q impairment adjustment (esg-d only)

Text mode
Original mode

Adjustments

ESG Family Signal Generators

I/Q Impairment Adjustment (ESG-D only)

5-42

Calibration Guide

I/Q Impairment Adjustment (ESG-D only)

Description

This adjustment sets internal calibration array values to minimize errors in the I/Q
adjustments (I/Q gain, I offset, Q offset, and quadrature skew) in the I/Q menu.

NOTE

This adjustment assumes the I/Q Gain/Offset/Quadrature calibration has
already been performed.

Required Test Equipment

• None

Procedure

1. Preset the signal generator.

2. Follow the instructions as they appear on the controller’s display.