beautypg.com

Ethernet address, Wlan address, Ztp datatime – Printronix P7000 Cartridge Ribbon Printer User Manual

Page 78: Ztp waittime

background image

78

Chapter

4

QUICK SETUP Menu

Ethernet Address

IP Address

. A numeric address such as 123.45.61.23 which identifies a

printer or server in a LAN or WAN.

Subnet Mask

. A binary value used to divide IP networks into smaller

subnetworks or subnets. This mask is used to help determine whether IP
packets need to be forwarded to other subnets.

Gateway Address

. A gateway address is the IP address of a hardware

device (gateway) that translates data between two incompatible
networks, which can include protocol translation.

MAC Address

. This menu item is the Manufacturer’s Assigned Number,

and is unique for each printer. It is read-only.

DHCP

. You can enable/disable the DHCP protocol using this option, but

consult your administrator for the appropriate setting.

WLAN Address

IP Address

. A numeric address such as 123.45.61.23 which identifies a

printer or server in a LAN or WAN.

Subnet Mask

. A binary value used to divide IP networks into smaller

subnetworks or subnets. This mask is used to help determine whether IP
packets need to be forwarded to other subnets.

Gateway Address

. A gateway address is the IP address of a hardware

device (gateway) that translates data between two incompatible
networks, which can include protocol translation.

MAC Address

. This menu item is the Manufacturer’s Assigned Number,

and is unique for each printer. It is read-only.

DHCP

. You can enable/disable the DHCP protocol using this option, but

consult your administrator for the appropriate setting.

ZTP DataTime

This option sets the pause time in the data stream that the ZTP requires
before moving the form to the tear bar once a print job is completed. The
values range from .5 to 5 seconds. The default is .5 seconds.

ZTP WaitTime

This option sets the minimum amount of time that the form stays at the tear
bar. This allows you time to remove the form before the form is retracted to
print the next form. The adjustable values range from 500 to 5000
milliseconds in increments of 500 milliseconds. The default value is 2
seconds.