Printronix P7000 Cartridge Ribbon Printer - Manual (Page 61)

61
Active Emulations
The emulations present in the printer are based on the firmware installed and
the emulation options included. Both are configured from the Factory and do
not require any action from the user.
IMPORTANT Be sure to know which type of firmware and options are purchased
(see Table 2) to understand the ACTIVE IGP EMUL, ACTIVE
EMULATION, and EMULATION main menus.
Table 2. Available Firmware Types and Options
Firmware Type
Optional
Emulations
Available
ACTIVE IGP
EMUL 1
ACTIVE
EMULATION 2
EMULATION
3
P7000 STD
IPDS
CTHI
PGL/VGL
IGP/PGL* N/A
IPDS
CTHI
IGP/PGL
LinePrinter+
IGP/VGL N/A
IPDS
CTHI
IGP/VGL
LinePrinter+
P7000 TN PGL/VGL
IGP/PGL* N/A IGP/PGL
LinePrinter+
IGP/VGL N/A IGP/VGL
LinePrinter+
P7000 PCL-II PGL/VGL N/A
PCL-II* PCL-II
IGP/PGL & LP+ IGP/PGL
LinePrinter+
IGP/VGL & LP+ IGP/VGL
LinePrinter+
NOTE:
* = Default Selection
1
The Active IGP EMULATION menu is only available when the PGL/VGL option is
installed.
2
The ACTIVE EMULATION menu shows the options “IGP/PGL & LP+” and
“IGP/VGL & LP+” when the PGL/VGL option is installed. Otherwise, “LinePrinter+”
replaces the options.
3
The selections under the EMULATION menu is based on the ACTIVE IGP EMULATION
or ACTIVE EMULATION settings with all Optional Emulations installed.