Printronix P7000 Cartridge Ribbon Printer - Manual (Page 243)

Postscript/PDF Interpreter
243
Optimize Barcode
Defines whether the barcode optimization feature is active.
• Yes (default). Activates the barcode optimization feature.
• No . Deactiviates the barcode optimization feature.
• Test . Boxes will print around all barcodes that are detected and
optimized. This provides a simple method to confirm that the software
correctly detects and optimizes all the barcodes on any given form.
NOTE: Barcodes will not optimize at densities of 96 dpi or less. For densities
with one dimension more than 96 and one 96 or less, barcodes will
only replace in one orientation. For instance, 180x90 picket fence
barcodes will be optimized and 90x180 ladder barcodes will be
optimized.
Alignment
Defines how the optimized replacement barcode will be positioned with
regard to the original barcode position if no obstacles exist to this placement.
It defines the first attempted position of the replacement barcode. If the first
attempted position causes a replacement barcode to interfere with any other
form elements (text, graphics, or dots), the replacement barcode
automatically adjusts away from these interfering elements until requested
horizontal quiet zones are observed. Selections for this menu are as follows:
• Left . The first attempted position of the leftmost bar of the replacement
barcode will be the same position as the leftmost bar of the original
barcode. For instance, if the replacement barcode is smaller than the
original barcode, it will be placed as follows:
If the replacement barcode is larger than the original barcode, the
replacement barcode will begin at the left edge of the original barcode
and expand beyond the right edge.
Replacement Barcode
Original Barcode
OpenPrint SURE SCAN Menu