Printronix P7000 Cartridge Ribbon Printer - Manual (Page 121)

WLAN EAP
121
ACTIVE IGP EMUL and ACTIVE EMULATIONS Menus
The emulation types present in the printer are based on the firmware installed
and the emulation options included. Both are configured from the Factory and
does not require any action from the user.
IMPORTANT Be sure to know which type of firmware and options are purchased
(see Table 2) to understand the ACTIVE IGP EMUL, ACTIVE
EMULATION, and EMULATION main menus.
This ACTIVE IGP EMUL and ACTIVE EMULATION function allows you to
activate the desired emulation. There are two methods for selecting the
desired emulation. The first is by selecting the emulation directly from the
printer menu. The second is by sending a host command which will switch the
emulation automatically (see the appropriate Programmer's Reference
Manual
for details ).
When changing from one emulation to the other, the printer will load the
power-up configuration and the new emulation parameters. Any configuration
settings performed before selecting these emulations that are not saved in
NVRAM will be lost.
Table 7. Available Firmware Types and Options
Firmware Type
ACTIVE IGP
EMUL
1
ACTIVE
EMULATION
2
EMULATION
3
P7000 STD
IGP/PGL* N/A
IPDS
CTHI
IPG/PGL
LinePrinter+
IGP/VGL N/A
IPDS
CTHI
IGP/VGL
LinePrinter+
P7000 TN
IGP/PGL* N/A IGP/PGL
LinePrinter+
IGP/VGL N/A IGP/VGL
LinePrinter+
NOTE:
* = Default Selection
1
The Active IGP EMULATION menu is only available when the PGL/VGL option is installed.
2
The ACTIVE EMULATION menu shows the options “IGP/PGL & LP+” and “IGP/VGL &
LP+” when the PGL/VGL option is installed. Otherwise, “LinePrinter+” replaces the options.
3 The selections under the EMULATION menu is based on the ACTIVE IGP EMULATION or
ACTIVE EMULATION settings with all Optional Emulations installed.
ACTIVE IGP EMUL and ACTIVE EMULATIONS Menus