Printronix P7000 Cartridge Ribbon Printer User Manual
Page 218
218
Chapter
4
IGP/VGL Emulation
LP+ Font
•
Disable
(default). The IGP/VGL uses its default half-dot font, which is
slightly different from the standard bitmap font used by LP+ at 12, 13, 15
and 17 cpi.
•
Enable
. The IGP/VGL uses the same font as used by LP+ at all cpi.
MSI Check Digit
•
(default). The check digit is appended at the end of the printable
data field for MSI barcodes.
•
Don't Print
. The check digit for MSI barcodes does not print.
I25 Selection
•
I25 Odd Data
(default). When an odd number of data is provided, the
default setting, Leading Zero, will add a zero to the beginning of the bar
code data. The setting, Check Digit, will add a check digit to the end of the
bar code data so that the results add up to an even number of data.
•
Convert Alpha
. Disable is the default. When enabled, each non-digit I25
bar code character will convert to “0.”
NOTE:
If you use an Interleaved 2/5 barcode that automatically adds the
check digit (type code k or l, IBARC type code INT2/5CD or INT2/
5CDA), the check digit is added regardless of how this parameter is
set.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
•
Disable
(default). The printable data field is printed with the AI enclosed
in parentheses. This is the standard EAN/UCC-128 format.
•
Enable
. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.