Printronix P7000 Cartridge Ribbon Printer - Manual (Page 216)

216
Chapter 4 IGP/VGL Emulation
Power Up ^PY
• Disable (default).
• Enable . Selects the graphics mode ^PY as the power-up default.
LPI
The number of lines to be printed per inch. For example, at 6 lpi there is 1/6
inch from the top of one print line to the top of the next print line.
Graphics Options
The following are several options which configure printing output.
Slash 0
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
• Disable (default). Zero is printed without a slash.
• Enable . Zero is printed with a slash.
Ignore Dots
• Disable (default).
• Enable . Causes the VGL to expect position values to be specified in only
1/10ths of an inch. If the dot position is also given, it is treated as text.
Append Rotated
• Disable (default). Logos and alphanumeric strings are treated as
separate elements.
• Enable . Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
Truncate Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form. The options include:
• Enable (default)
• Disable
True Vert 1/10
• Disable (default). A vertical 1/10 of an inch parameter is used as 7/72 of
an inch. The absolute move is slightly smaller than expected. For
example, a one-inch move would be 70/72 of an inch. Vertical moves that
have the same value are identical in length.
• Enable . A vertical 1/10 inch parameter is used as 1/10 inch. Rounding
occurs to the nearest 1/72 inch. This can cause vertical moves that have
the same value to differ by
±
1/72 inch.