Wlan leap, Auth method, Leap username – Printronix P7000 Cartridge Ribbon Printer User Manual
Page 119: Reset leap user, Leap password, Reset leap password
WLAN LEAP
119
WLAN LEAP
Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open
(default). Selects open authentication.
•
Shared
. Selects shared key authentication.
•
LEAP
. Selects LEAP authentication (for use with a Cisco RF card
installed).
LEAP Username
•
LEAP Username (01-15)
. The first 15 characters of the LEAP user name
(maximum number of characters is 32).
•
LEAP Username (16-30)
. Characters 16 to 30 of the LEAP user name
(maximum number of characters is 32).
•
LEAP User (31-32)
. Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).
Reset LEAP User
Resets the LEAP user name to an empty string.
LEAP Password
•
LEAP Password (01-15)
. The first 15 characters of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (16-30)
. Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (31-32)
. Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
Reset LEAP Password
Resets the LEAP password to an empty string.
WLAN
LEAP
2
(from page 105)
Auth Method
Open*
Shared
LEAP
1
* = Factory Default
1
Only if a Cisco radio card is installed.
LEAP
Username
Reset LEAP
User
LEAP Username (01-15)
LEAP Username (16-30)
LEAP Username (31-32)
LEAP
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
Reset LEAP
Password