Printronix P7000 Cartridge Ribbon Printer - Manual (Page 179)

Proprinter XL Emulation
179
Proprinter XL Emulation
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
• CR = CR (default). Does not insert an extra line feed after each carriage
return.
• CR = CR + LF . Inserts an extra line feed after each carriage return.
Auto LF
This option defines the printer action when print data is received past the
forms width setting.
• Enable (default). Performs an automatic carriage return and line feed
when data is received past the forms width.
• Disable . Discards any data past the forms width.
Define LF Code
• LF = LF (default). Does not perform an automatic carriage return when a
Line Feed command is received. The next print position will be the current
print position of the next line.
• LF = CR + LF . Forces an automatic carriage return with each Line Feed
command received. The next print position is print position 1 of the next
line.
FF Valid at TOF
• Enable (default). Performs a form feed when the host sends a Form Feed
command and the printer is at the top of form.
• Disable . Will not perform a form feed when the host sends a Form Feed
command and the printer is at the top of form.
Printer
Protocol
(from page 158)
Define CR
Code
Auto LF Define LF
Code
FF valid at
TOF
Character
Set
Alt. Char
Set
20 CPI
Condensed
CR = CR*
CR = CR + LF
Enable*
Disable
LF = LF*
LF = CR + LF
Enable*
Disable
(see page 181) Set 1*
Set 2
Enable*
Disable
* = Factory Default
Proprinter
XL