Vfu select, Alt. set 80-9f, Character set – Printronix P7000 Cartridge Ribbon Printer User Manual
Page 167: Sfcc d command, Pseries dbl high, Ff valid at tof
P-Series Emulation (With LG)
167
VFU Select
Controls how the printer handles vertical formatting.
•
EVFU
(default). Enables the VFU and selects P-Series compatible
Electronic Vertical Format Unit (EVFU).
•
DVFU
. Enables the VFU and selects the Dataproducts compatible Direct
Access Vertical Format Unit (DVFU).
•
CVFU
. Enables the VFU and selects the Centronics compatible Direct
Access Vertical Format Unit (CVFU).
•
Disable
. Disables all VFU processing.
Alt. Set 80-9F
Determines whether the printer processes ASCII codes hex 80 through hex
9F as control codes or as printable characters. The options include:
•
Control Code
(default)
•
Printable
.
Character Set
Specifies a character set as shown in the
. To use one of these sets, choose the desired group
heading (such as European Sets) and press ENTER. Then choose the
desired set within that group (such as Roman 8) and press ENTER. Both the
group and the desired set will be starred to indicate your selection. The UTF-8
selection allows printing of UTF-8 encoded Unicode ™. Character sets are
shown in detail in the
Character Sets Reference Manual
.
SFCC d Command
•
Even dot plot
(default). This option interprets SFCC d Command as even
dot plot.
•
Double High
. This option interprets SFCC d Command as double high.
Select this option for backward compatibility.
PSeries Dbl High
Allows printing compatibility between current and older model printers.
•
Normal
(default). This is normal, double-high printing for current model
printers.
•
P3/4/6/9 Compat
. Where older printers print two dot rows higher, this
option allows for compatibility by raising the print two dot rows to match
the current models dot row value (two dot rows lower).
FF Valid at TOF
•
Enable
(default). Performs a form feed when the host sends a Form Feed
command and the printer is at the top of form.
•
Disable
. Will not perform a form feed when the host sends a Form Feed
command and the printer is at the top of form.