Printronix P7000 Cartridge Ribbon Printer - Manual (Page 250)

250
Chapter 4 OpenPrint SURE SCAN Menu
Barcodes on Page
This setting defines the number of barcodes that must be detected on the
form. If the value is set to “Auto” (default), no particular number of barcodes
are required to be detected. If the value is set to a number between 1 to 20,
then the number of barcodes set is required to be detected on each form. If
the printer detects fewer barcodes than the value set, the fault “x/y
BARCODES / Not Found” is declared. x represents the number of barcodes
not found, and y represents the Barcodes on Page value. Printing will not
continue until the user clears this fault.
Bcodes Optimized
This is a display menu that continuously counts the number of barcodes that
have been optimized since power-up. This statistic only resets to zero when
the printer is powered off. This menu can be used as a diagnostic to check the
number of barcodes optimized over a period of time or over a batch file.