Printronix P7000 Cartridge Ribbon Printer - Manual (Page 120)

120
Chapter 4 NETWORK SETUP Menu
WLAN EAP
EAP Mode
This feature allows the user to select the mode used for the wireless network
interface.
• None (default). EAP authentication is disabled.
• LEAP . Selects Cisco LEAP authentication.
• PEAP . Selects PEAP authentication.
• TTLS . Selects TTLS authentication.
EAP Username
• EAP Username (01-15) . The first 15 characters of the EAP user name
(maximum number of characters is 32).
• EAP Username (16-30) . Characters 16 to 30 of the EAP user name
(maximum number of characters is 32).
• EAP User (31-32) . Characters 31 to 32 of the EAP user name (maximum
number of characters is 32).
Reset EAP User
Resets the EAP user name to an empty string.
EAP Password
• EAP Password (01-15) . The first 15 characters of the EAP password
(maximum number of characters is 32).
• EAP Password (16-30) . Characters 16 to 30 of the EAP password
(maximum number of characters is 32).
• EAP Password (31-32) . Characters 31 to 32 of the EAP password
(maximum number of characters is 32).
Reset EAP Password
Resets the EAP password to an empty string.
WLAN
EAP
1
(from page 105)
EAP Mode
None*
LEAP
PEAP
TTLS
* = Factory Default
1 Only if a Symbol 5127 radio card is installed.
EAP
Username
Reset EAP
User
EAP Username (01-15)
EAP Username (16-30)
EAP Username (31-32)
EAP
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
Reset EAP
Pswd