beautypg.com

Printronix P7000 Cartridge Ribbon Printer User Manual

Page 31

background image

Reload Paper

31

Figure 8. Setting the Platen Lever

9.

Turn the platen stop knob clockwise or counterclockwise to match the
paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-,
and 6-part paper thickness).

NOTE:

If you are using the same thickness of paper, there is no need to
readjust.

10. Lower the platen lever until it stops.

11. Press

ON LINE/CLEAR

to remove the “LOAD PAPER” fault message

from the display.

12. Press

PAPER ADVANCE

several times to make sure the paper feeds

properly beyond the tractors and over the lower paper guide. Feed
sufficient paper to ensure the paper stacks correctly.

13. Close the printer top cover. Close the cabinet front door.

14. Press

ON LINE/CLEAR

to place the printer in online mode and resume

printing.

183444b

183446b

Platen Lever

Vertical Position
Knob

Platen Stop
Knob

A

Platen
Stop

183445b

Paper Thickness
Indicator

A