Printronix P7000 Cartridge Ribbon Printer - Manual (Page 233)

233
Config Print
This option prints the emulation's parameters and the currently selected
values.
Symbol Set Print
This option prints a list of all the available sets. The character set number
prints to the left of the character set sample.
Reset Cmd CFG Ld
When the printer receives a host data stream reset command in addition to
resetting printer variables, the selected configuration will be loaded.
• Current Config (default). If you have preset and presaved multiple
configurations, then the currently selected presaved configuration is
loaded when the reset command is received.
• Factory Config . The factory installed configuration is loaded when the
reset command is received.
• Disable . The printer ignores the reset command when it is received and
continues to use the currently loaded configuration.
• Power-Up Config . The power-up configuration is loaded when the reset
command is received.
LG Emulation
Font Horiz Forms Autowrap CR
FF Unsolicited
Rpt
Print Mode
Opt
Plot Mode
Opt
(see page 234) Left Mrg 00.0*
Right Mrg 13.2
No*
Yes
= CR*
= CR + LF
= FF*
= CR + FF
No*
Small
Big
Enable*
Disable
Enable*
Disable
* = Factory Default
LG
EMULATION
(from page 123)
Vert. Forms LF
= LF*
= CR + LF
I-2/5 Guard
Bars
Enable*
Disable
Bot Frm 66/6
Top Mrg 0/6
Bot Mrg 66/6
LG Emulation