Printronix P7000 Cartridge Ribbon Printer - Manual (Page 248)

248
Chapter 4 OpenPrint SURE SCAN Menu
Ver. Erase Zone
This menu defines the area above and below the bars that will be erased,
regardless of picket fence or ladder orientation. It is used when the barcode
has extraneous data beyond the bars that need to be deleted as it is being
optimized.
The height of the area can be defined between 0 and 0.99 inches in 0.01 inch
increments. The default is 0 inches (no empty space). This feature can be
used to remove special attributes remainders of the original barcode such as
a guard bar or line that borders the top and bottom of the bars. It can also be
used to erase the original PDF if the user wants to force all PDFs to be
optimized (see Update PDF on page 249). The PDF occupies more than 1/6
of an inch.
Quiet Zone Fault
This menu defines whether a fault must be reported on the front panel LCD if
the BCDOPT feature cannot print the replacement barcode without violating
the quiet zone as defined in the “Hor. Quiet Zone” menu, where the width of
the replacement barcode plus quiet zones is too large to fit the available white
space on the page.
• Enable (default). If this fault occurs, reduce the quiet zone to see if the
barcode fits.
• Disable . Quiet zone violations are not reported, but adjacent page
elements could be drawn too close to replacement barcodes and possibly
overlap.
Vertical Erase Distance
Vertical Erase Distance
Vertical Erase Distance
Erase
Area
(picket)
Erase
Area
(ladder)