Printronix P7000 Cartridge Ribbon Printer - Manual (Page 242)

242
Chapter 4 OpenPrint SURE SCAN Menu
Move to TOF
When the page length given does not match the printer, the printer driver will
have to determine how the TOF is kept relative to each page printed. The
following menu options are available through the front panel and the driver:
• Disable . Only when the FF key is pressed.
• At End of Job . After the Current Job.
• At End of Page (default). After each Page Printed.
Gray Adjust
This menu adjusts the darkness of the gray elements on the page by
gradually reducing or increasing the amount of dots that are placed in the
halftone patterns. Pure white and black colors are not affected by setting.
The menu ranges from -10 to +10. The default value is 0.
OpenPrint SURE SCAN Menu
-10
All
White
-9 -8 -7 -6 -5 -4 -3 -2 -1 0
Default
1 2 3 4 5 6 7 8 9 10
All
Black
SURE SCAN 1
(from page 75 and
page 76)
Optimize
Barcode
Yes*
No
Test
Alignment
Left
Center*
Right
Hor. Quiet
Zone
0.20 Inch*
0 to 0.99 inch
Ver. Erase
Zone
0.00 Inch*
(0 to 0.99 inch)
Update
PDF
Embedded Only*
Always
* = Factory Default
1
Available when Postscript/PDF is selected as the Active Emulation
on OpenPrint P7000 products.
2 Display menu only.
Quiet Zone
Fault
Enable*
Disable
Barcodes On
Page
Auto*
1, 2,...,20
Bcodes
Optimized
2
xxxxxx 2