Printronix P7000 Cartridge Ribbon Printer - Manual (Page 199)

IGP/PGL Submenu (with LG)
199
IGP/PGL Submenu (with LG)
Define CR (Carriage Return) Code
This parameter forces the printer to insert an automatic Line Feed code into
the data stream whenever a Carriage Return code occurs. This is to be used
only if the host computer does not send line feeds to the printer.
• CR = CR (default). Does not perform a line feed. The next print position
will be print position 1 of the current line.
• CR = CR + LF . Performs an automatic line feed. The next print position
will be print position 1 of the next line.
EMULATION
(from page 123)
Define CR
Code
Define LF
Code
CR = CR*
CR = CR + LF
LF = LF*
LF = CR + LF
Disable*
Enable
7E* 16*
15
Disable*
Enable
0*
1-34
6.0*
8.0
9.0
10.0
Disable*
Enable
Enable*
Disable
Enable*
Disable
* = Factory Default
Disable*
Enable
Disable*
Enable
Ignore Mode
Disable*
Enable
Select Char
0*
(0-255)
Disable*
Enable
IGP/PGL
PGL
SFCC
PI Slew
Range
CR Edit Select Font
Select LPI Auto
Uppercase
Skip Cmd
Prefix
Power On
IGP/PGL
Ext Execute
Copy
Compressed
CPI
Ignore
Char
IGP100
Compatbl.
UPC
Descenders
Enable*
Disable
Optimized
Ratio
Disable*
Enable
Autowrap