Xantrex Technology XDC 20-600 - Manual (Page 76)

Operation
3–14 TM-XDOP-01XN
Fold Protection options are:
• None: Fold protection disabled
• CC: Shutdown on entering CC mode
• CV: Shutdown on entering CV mode
• CP: Shutdown on entering CP mode
A programmable delay time causes the supply to wait before shutting down the
output.
To set Fold Protection:
Step # Do This You Will See
1 OVP SET 0V
2
Press repeatedly.
Fold SD Mode
3
4 Use the arrow keys or the numeric keypad to select the
value: None, CC, CV, CP Fold on ####
5
6 Use the arrow keys or the numeric keypad to select the
delay time. Delay 0s
7 This setting is saved.
PROT SET
ALARMS
PROT SET
ALARMS
ENTER
ENTER
ENTER
TM-XDOP-01XN.book Page 14 Monday, July 17, 2006 11:19 AM