Xantrex Technology XDC 20-600 - Manual (Page 235)

S
C
PI C
o
mmand S
u
mmary
TM-XDOP-01XN
C
–11
Query Power On
Status Clear *PSC?
[:]STATus[]:POSClear?
Query Power-On Status Clear
setting N/A
Power-On Status
Clear *PSC
[:]STATus[]:POSClear
Controls the automatic power-on
clearing of the Service Request
Enable Register, Standard Event
Status Enable Register, Parallel
Poll Enable Register and other
event enable registers. Possible
values are 0 (leave them alone) or
1 (clear them). N/A
Recall *RCL
[:]SYSTem[]=RECall
Restores the settings of unit from
values stored in memory. N/A
Reset *RST
[:]SYSTem[]:RESet
Performs a device reset. Set the
power supply to a known state that
is independent of the use history
of the device. N/A
Save User Settings *SAV
[:]SYSTem[]:SAVE[USER]
Stores the current setting of the
device in local memory. Scope is
same as *RST N/A
Save Default
Settings *SDS
[:]SYSTem[]:SAVE:DEFault
Save the factory default settings. N/A
Query Service
Request Enable *SRE?
[:]STATus[]:SREQuest:ENABle?
Query the Service Request Enable
Register bits. N/A
Service Request
Enable *SRE
[:]STATus[]:SREQuest:ENABle
enable>
Set the Service Request Enable
Register bits. N/A
Read Status Byte *STB?
[:]STATus[]:SBYTe[EVENt]?
Read the status byte and Master
Summary Status bit. N/A
Table C-1 IEEE 488.2 Commands
Function SCPI Commands Description Query
TM-XDOP-01XN.book Page 11 Monday, July 17, 2006 11:19 AM