Xantrex Technology XDC 20-600 - Manual (Page 70)

Operation
3–8 TM-XDOP-01XN
Power Supply Operation
This section describes how to configure and operate the power supply.
Set Voltage
The VOLTAGE key allows you to set and view the DC voltage output setpoint.
Set Current
The CURRENT key allows you to set and view the DC current output setpoint.
Step # Do This You Will See
1 Set #####V
2 Use the numeric keypad, Voltage
knob, or arrow keys to enter a
value (0–103% of rated voltage).
3 This saves the setting and enables
the new voltage setpoint.
VOLTAGE
ENTER
Step # Do This You Will See
1 Set #####A
2 Use the numeric keypad, Current
knob, or arrow keys to enter a
value (0–103% of rated current).
3 This saves the setting and enables
the new current setpoint.
CURRENT
ENTER
TM-XDOP-01XN.book Page 8 Monday, July 17, 2006 11:19 AM