Xantrex Technology XDC 20-600 - Manual (Page 112)

Operation
3–50 TM-XDOP-01XN
The combination must not exceed 1%/30us. Though the software will attempt to
achieve higher slew rates, it is limited to this value by hardware constraints. The
power supply slew rate cannot be faster than the rise and fall times given in the
product specifications in Appendix A. Manufacturer's recommendation is to keep
the slew rate at or below the default value.
View Model Information
The MODEL INFO menu option displays hardware and software information
including:
• Manufacturer (Xantrex)
• Model description (e.g. XDC 60–100)
• Voltage and current ratings (60 V 100 A)
• ROM version (e.g. ROM Ver. 5.000)
• FPGA version (e.g. FPGA Ver. A007)
• SCPI version supported (e.g. SCPI 1997.0)
• Serial number
To access and work with the View Model Information option:
Step # Do This You Will See
1 ERROR MSGS
2 1 time MODEL INFO
3 Xantrex
Press Up or Down arrow keys to cycle through
Model Information.
MENU
ENTER
TM-XDOP-01XN.book Page 50 Monday, July 17, 2006 11:19 AM