Xantrex Technology XDC 20-600 - Manual (Page 238)

SC
PI Co
mmand Re
fe
ren
ce
C–14
TM-XDOP-01XN
Query Under
Current Protection
Tripped [[:]SOURce][]:CURRent:PROTection:UNDer:
TRIPped?
Query if under current protection
mechanism has tripped N/A
Set Over Power
Protection Level [SOURce][]:POWer:PROTection[:OVER][:LEV
el] {|MAXimum|MINimum}
Set the over power protection
level Yes
Set Over Power
Protection
Shutdown State [SOURce][]:POWer:PROTection[:OVER]:STAT
e
Select over power protection to
shutdown (ON) or set alarm
(OFF) Yes
Query Over
Power Protection
Tripped [[:]SOURce][]:POWer:PROTection[:OVER]:T
RIPped?
Query if over power protection
mechanism has tripped N/A
Set Under Power
Protection Level [[:]SOURce][]:POWer:PROTection:UNDer[:L
EVel] {|MAXimum|MINimum}
Set under power protection level Yes
Set Under Power
Protection
Shutdown State [[:]SOURce][]:POWer:PROTection:UNDer:ST
ATe
Select under power protection to
shutdown (ON) or set alarm
(OFF) Yes
Query Under
Power Protection
Tripped [[:]SOURce][]:POWer:PROTection:UNDer:TR
IPped?
Query if under power protection
mechanism has tripped N/A
Set Over Voltage
Protection Level [[:]SOURce][]:VOLTage:PROTection[:OVER]
[:LEVel] {|MAXimum|MINimum}
Set the over voltage protection
level Yes
Query Over
Voltage Protection
Tripped [SOURce][]:VOLTage:PROTection[:OVER]:TR
IPped?
Query if over voltage protection
mechanism has tripped N/A
Set Under Voltage
Protection Level [[:]SOURce][]:VOLTage:PROTection:UNDer[
:LEVel] {|MAXimum|MINimum}
Set under voltage protection level N/A
Set Under Voltage
Protection
Shutdown State [[:]SOURce][]:VOLTage:PROTection:UNDer:
STATe
Select under voltage protection to
shutdown (ON) or set alarm
(OFF) Yes
Query Under
Voltage Protection
Tripped [[:]SOURce][]:VOLTage:PROTection:UNDer:
TRIPped?
Query if under voltage protection
mechanism has tripped N/A
Table C-3 Commands for Output Control
Function SCPI Command Description Query
TM-XDOP-01XN.book Page 14 Monday, July 17, 2006 11:19 AM