Xantrex Technology XDC 20-600 - Manual (Page 252)

SC
PI Co
mmand Re
fe
ren
ce
C–28
TM-XDOP-01XN
Table C-13 Output State
Function SCPI Command Description Query
Set Output State [:]OUTPut[][:STATe] Enable/disable the power supply
output. Yes
Set Output State at
Power-On [:]OUTPut[]:PON:STATe Selects the state of the output at
power-on Yes
Power-On
Configuration [:]OUTPut[]:PON:RECall
{LAST|PRESet|USER|SEQ
ce_number>}
Configure the supply to recall last
setting, one of the user settings,
factory preset values or to enable
an auto sequence. Yes
TM-XDOP-01XN.book Page 28 Monday, July 17, 2006 11:19 AM