Xantrex Technology XDC 20-600 - Manual (Page 110)

Operation
3–48 TM-XDOP-01XN
To set the power limit:
Step # Do This You Will See
1 ERROR MSGS
2
until you see the “SETPT LIMIT”
option
SETPT LIMIT
3 Voltage Limit
4
2 times
Power Limit
5 High #####W
6 Use the arrow keys, or numeric keypad to
enter a value. The value must be within 0W
to 103% of the unit’s rated power and must
be higher than the power setpoint. High #####W
7 Low #####W
The Maximum setting is
saved and the Minimum
setting appears.
8 Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0W to 103% of the unit’s
rated power and must be lower than the
power setpoint. Low #####W
9 The setting is saved and
the display returns to its
default operating mode.
MENU
ENTER
ENTER
ENTER
ENTER
TM-XDOP-01XN.book Page 48 Monday, July 17, 2006 11:19 AM