Xantrex Technology XDC 20-600 - Manual (Page 256)

SC
PI Co
mmand Re
fe
ren
ce
C–32
TM-XDOP-01XN
Table C-15 Legacy Commands
Function SCPI Command Description Query
Reset CLR Equivalent to *RST and SYSTem:RESet commands
Performs a device reset. Set the power supply to a known state that is
independent of the use history of the device N/A
Query System Error ERR? Equivalent to SYSTem:ERRor? command except that the return string
contains the command
Returns the next error in the instrument’s error queue N/A
Identification Query ID? Query identification string. (Model ID and Version) N/A
Read Output
Current IOUT? Equivalent to MEASure:CURRent? command
Read output current N/A
Set High Current
Limit IMAX Equivalent to SOURce:CURRent:LIMit:HIGH command.
Set upper limit of current setpoint range (soft limits) Yes
Set (Immediate)
Current Setpoint ISET Equivalent to SOURce:CURRent command.
Change current setpoint Yes
Set Output State OUT
state>
Equivalent to OUTP command.
Enable/disable the power supply output Yes
Set Over Voltage
Protection Level OVSET Equivalent to SOURce:VOLTage:PROTection:OVER:LEVel
command.
Set the over voltage protection level Yes
ROM Query ROM? Queries the main firmware version N/A
Clear Output
Protection RST Equivalent to OUTPut:PROTection:CLEar command.
Clears the protection mechanism N/A
Set High Voltage
Limit VMAX Equivalent to SOURce:VOLTage:LIMit:HIGH command.
Set upper limit of voltage setpoint range (soft limits) Yes
Read Output
Voltage VOUT? Equivalent to MEASure:VOLTage? command.
Read output voltage N/A
Set (Immediate)
Voltage Setpoint VSET Equivalent to SOURce:VOLTage command.
Change voltage setpoint Yes
TM-XDOP-01XN.book Page 32 Monday, July 17, 2006 11:19 AM