beautypg.com

68 processing element features car (pe_feat), Section 5.68 – Texas Instruments TMS320C645X User Manual

Page 170

background image

www.ti.com

5.68

Processing Element Features CAR (PE_FEAT)

SRIO Registers

Figure 124. Processing Element Features CAR (PE_FEAT)

31

30

29

28

27-16

BRIDG MEMO

PROC

SWIT

Reserved

E

RY

ESSO

CH

R

R-

R-

R-

R-

R-0x00

0x00

0x00

0x01

0x00

LEGEND: R = Read only; -n = value after reset

15-8

7

6

5

4

3

2-0

Reserved

FLOW

RETR

CRF_

LARG

EXTE

EXTENDED_ADDRESS

_CON

ANSMI

SUPP

E_SU

NDED

ING_SUPPORT

TROL

T_SU

ORT

PPOR

_FEAT

_SUP

PPRE

T

URES

PORT

SS

R-0x00

R-

R-

R-

R-

R-

R-0x0001

0x00

0x00

0x00

0x00

0x01

LEGEND: R = Read only; -n = value after reset

Table 98. Processing Element Features CAR (PE_FEAT) Field Descriptions

Bit

Field

Value

Description

31

BRIDGE

PE can bridge to another interface. Examples are PCI, proprietary processor buses, DRAM, etc.

30

MEMORY

PE has physically addressable local address space and can be accessed as an endpoint through
non-maintenance (i.e., non-coherent read and write) operations. This local address space may be
limited to local configuration Registers, or could be on-chip SRAM, etc.

29

PROCESSOR

PE physically contains a local processor or similar device that executes code. A device that bridges
to an interface that connects to a processor does not count (see bit 31).

28

SWITCH

PE can bridge to another external RapidIO interface- an internal port to a local endpoint does not
count as a switch port. For example, a device with two RapidIO ports and a local endpoint is a two
port switch, not a three port switch, regardless of the internal architecture.

27-8

Reserved

Reserved

7

FLOW_CONTRO

PE supports congestion flow control mechanism

L_SUPPORT

0b

PE does not support flow control

1b

PE supports flow control

6

RETRANSMIT_S

PE supports suppression of error recovery on packet CRC errors.

UPPRESS

0b

PE does not support suppression

1b

PE supports suppression

5

CRF_SUPPORT

This bit indicates PE support for the Critical Request Flow (CRF) Function.

0b

PE does not support CRF Function

1b

PE supports CRF Function

4

LARGE_SUPPO

Support of common transport large systems.

RT

0b

PE does not support common transport large systems

1b

PE supports common transport large systems

3

EXTENDED_FEA

PE has extended features list; the extended features pointer is valid.

TURES

2-0

EXTENDED_ADD

Indicates the number address bits supported by the PE both as a source and target of an operation.

RESSING_SUPP

All PEs shall at minimum support 34 bit addresses. Encodings other than below are reserved.

ORT

111b

PE supports 66, 50 and 34 bit addresses

101b

PE supports 66 and 34 bit addresses

011b

PE supports 50 and 34 bit addresses

001b

PE supports 34 bit addresses

Serial RapidIO (SRIO)

170

SPRU976 – March 2006

Submit Documentation Feedback