8 block n enable status register (blkn_en_stat), Section 5.8 – Texas Instruments TMS320C645X User Manual
Page 107
www.ti.com
5.8
Block n Enable Status Register (BLKn_EN_STAT)
SRIO Registers
There are nine of these registers, one for each of nine logical blocks in the peripheral.
Figure 64. Block n Enable Status Register (BLKn_EN_STAT)
31-16
Reserved
R-0x00
LEGEND: R = Read only; -n = value after reset
15-1
0
Reserved
EN_S
TAT
R-0x00
R-
Undefi
ned
LEGEND: R = Read only; -n = value after reset
Table 35. Block n Enable Status Register (BLKn_EN_STAT) Field Descriptions
Bit
Field
Value
Description
31-1
Reserved
Reserved
0
EN_STAT
Indicates state of BLKn_EN reset signal
0
Logical block n disabled, in reset and clock is off
1
Logical block n enabled and clocking
SPRU976 – March 2006
Serial RapidIO (SRIO)
107