Roland Atelier AT900 - Manual (Page 60)

58
Selecting and Playing Sounds
Selecting the Type of Vintage Organ
1.
Press one of the Vintage Organ buttons so its indicator is
lit.
Each time you press the button, the indicator will alternate between ON (lit)
and OFF.
There are three types of vintage organ.
Modifying the Sound
2.
Slide the harmonic bars that you want to hear.
You can layer the sound of multiple harmonic bars.
Various pitches can be combined for the Lower keyboard in the same way as
for the Upper keyboard.
The harmonic bar for the Solo part will adjust the volume of the voice selected
for the Solo part. When you move the Solo part’s harmonic bar, the Solo
part’s level indicator will also change.
Playing a Vintage Organ Voice
Button Description
[Flute] button Full Organ
[Pipe] button Pipe Organ
[Theater] button Theater Organ
Vintage Organ
Type
Function of the Harmonic Bars
Flute
Slide the harmonic bars to adjust the volume of each
footage over a range of nine steps (0–8).
Pipe Use the harmonic bars to turn each footage on/off.
Pulling a harmonic bar out will turn it on, and pushing it
in will turn it off.
Theater
NOTE
The glide effect cannot be
applied to vintage organ
voices.
Additionally, if the vintage
organ type is “Flute,” the pitch
bend and sustain effects cannot
be applied.
Percussion is often used with
Flute. It can also be used with
Pipe or Theater, but if you have
selected percussion for Flute,
switching to Pipe or Theater will
cause percussion to be
cancelled automatically.
AT-900_e.book 58 ページ ２００８年９月１６日 火曜日 午前１０時３８分