Adding reverberation to the sound (reverb effect) – Roland Atelier AT900 User Manual
Page 153
151
Applying Various Effects to the Sound
Applying Various Effects to the Sound
Reverb is an effect that adds a sense of spaciousness to the sound, creating
the illusion of playing in a large or small concert hall, a large or small room,
a small club, etc.
fig.05-16-1.eps
1.
Press the Reverb [
▲
] or [
▼
] buttons to adjust the overall
Reverb amount.
When you press the up button [
▲
], additional Reverb is applied. Pressing the
down button [
▼
] decreases the Reverb level. If none of the Reverb indicators
are lit, the Reverb effect will not be heard.
When you press the Reverb [
▲
] [
▼
] buttons, the Part Balance Monitor screen
appears. In the Part Balance Monitor screen you can check the reverb depth.
fig.01-27.eps
Adding Reverberation to the Sound (Reverb Effect)
Min
Max
Min
Max
Min
Max
Min
Max
The Part Balance Monitor
screen is displayed for several
seconds and then closes
automatically.
If you touch
continues to be displayed until
you touch
AT-900_e.book 151 ページ ２００８年９月１６日 火曜日 午前１０時３８分