Roland Atelier AT900 - Manual (Page 140)

138
Using the Performance Functions
You can use the expression pedal to adjust the overall volume. When you
depress the Expression Pedal, the volume increases. The volume decreases as
you tilt the pedal back.
fig.04-03.eps
Adjusting the Overall Volume Using an Expression Pedal
You can specify how the
Expression Pedal will affect the
sound when it is pressed (p.
139).
increase
the volume
decrease
the volume
You can also specify whether
the Expression Pedal will or will
not control the volume during
the recording of your
performance (p. 213).
You can specify whether the
Expression Pedal will or will not
control the volume during the
playback of recorded
performance (p. 214).
Using the expression pedal enables you to give your performances even richer
musical expressiveness.
The expression pedal features the following special characteristics:
• Completely releasing the expression pedal does not lower the volume to
zero. If you do want to turn down the volume completely, set the [Master
Volume] slider to the Min (Minimum) position.
• Even as you release your foot from the expression pedal and lower the
volume, the lower-range portion will linger on. This provides a natural-
sounding resonance.
• When an Active Expression voice is selected, the expression pedal can be
used to produce changes in the voice (p. 71).
You can connect a pedal
keyboard (PK series; sold
separately) to the AT-900C and
use the pedal keyboard’s
expression pedal.
AT-900_e.book 138 ページ ２００８年９月１６日 火曜日 午前１０時３８分