Roland Atelier AT900 - Manual (Page 172)

170
Recording/Playing Back What You Play
Playing Back All Performance Data
1. Prepare the song that you want to play back.
If you want to play a song from USB memory, connect it
to the External Memory connector.
If you want to play a song from floppy disk, connect the
floppy disk drive to the Ext Drive connector, and insert a
floppy disk into the drive.
2. While holding down the [Song] button, press
the [Play/Stop] button.
fig.01-01.eps
All performance data saved on the USB memory or
floppy disk will be played consecutively.
3. To stop playback, press the [Play/Stop]
button.
fig.07-08.eps
If Internal Memory Contains
Performance Data that has not been
Saved
If internal memory contains performance data that has not
been saved to USB memory or the Favorites (User memory),
the message “The song will be erased. OK?” will appear.
If you wish to erase the performance
song
1. Touch .
If you don’t wish to erase the
performance song
1. Touch .
Save the song to USB memory or a floppy disk (p. 182).
When the Rec/Play screen is displayed, the track button will
light to indicate a track in which a performance has been
recorded. By turning off these track buttons, you can
temporarily silence the sound. This is referred to as “Track
Mute.”
If you want to play back a song from USB memory, connect
your USB memory to the External Memory connector before
you continue.
If you want to play back a song from floppy disk, connect your
floppy disk drive to the Ext Drive connector, and insert the
floppy disk.
1. Press the [Song] button.
The Song Select screen appears.
fig.07-31.eps
2. Touch < > < > to select the desired
media.
Choose “Favorites” if you want to play back a song from
User memory, choose “Ext Memory” if you want to play
back a song from USB memory, or choose “Disk” if you
want to play back a song from floppy disk.
3. Touch < > < > to select the song that you
wish to play back.
Silencing a Specific Track
(Track Mute)
AT-900_e.book 170 ページ ２００８年９月１６日 火曜日 午前１０時３８分