Roland Atelier AT900 User Manual
Page 186
184
Recording/Playing Back What You Play
7.
Touch
fig.07-31.eps
The selected performance data will be loaded into
internal memory.
If the Following Screen Appears
The message below is shown when the performance song in
the unit has not been saved to USB memory or Favorites (User
memory).
fig.E-62.eps
If you wish to erase the performance
song
1.
Touch
If you don’t wish to erase the
performance song
1.
Touch
Save the song to USB memory or a floppy disk (p. 182).
If loading is canceled because the memory limit has been
reached, the following message will be displayed:
fig.E-30.eps
You can delete a performance song that was saved onto a
“Favorites,” USB memory, or floppy disk.
If you want to delete a song in USB memory, connect your
USB memory to the External Memory connector before you
continue.
If you want to delete a song in floppy disk, connect the floppy
disk drive to the Ext Drive connector, and insert a floppy disk
into the drive.
1.
Touch
The Rec/Play screen appears.
2.
Touch <
> (Utility).
The Utility screen appears.
3.
Touch
The Song Save/Song Delete screen appears.
fig.07-23.eps
4.
Touch <
> <
> to select the desired
media.
If you want to delete a song from the User memory,
choose “Favorites.”
If you want to delete a song from USB memory, choose
“Ext Memory.” If you want to delete a song from floppy
disk, choose “Disk.”
5.
Touch <
> <
> to select the performance
data that you wish to delete.
Deleting Performance Songs
Stored on “Favorites” or the
USB Memory
AT-900_e.book 184 ページ ２００８年９月１６日 火曜日 午前１０時３８分