Roland Atelier AT900 - Manual (Page 230)

228
Various Other Settings
You can adjust the brightness of the display.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Display
Brightness.
fig.09-44.eps
3. Touch the Display Brightness setting.
fig.09-45.eps
4. Touch < > < > to change the setting.
Higher values will make the screen brighter.
5. Touch .
This setting remains stored in memory even while power is
turned off.
You can set the main screen so that the bouncing ball does not
appear.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Main
Bouncing Ball.
fig.09-44.eps
3. Touch the Main Bouncing Ball setting to switch
between “ON” and “OFF.”
Each time you touch the Main Bouncing Ball setting, it
will alternate between “ON” and “OFF.”
4. Touch .
This setting remains stored in memory even while power is
turned off.
Adjusting the Brightness of the Display
Setting
1–3
Eliminating the Bouncing Ball from the
Main Screen
Setting Description
ON
The bouncing ball appears in the main
screen.
OFF
The bouncing ball does not appear in the
main screen.
AT-900_e.book 228 ページ ２００８年９月１６日 火曜日 午前１０時３８分