Roland Atelier AT900 - Manual (Page 54)

52
Selecting and Playing Sounds
Immediately after the power is turned on, the Pedal Bass voice will sound
single notes using the “Organ Bass1” voice.
Press the buttons of the various parts of “Pedal Organ” and “Pedal Orchestral”
to select voices.
Example: Select “Pipe Org. Bs” for the Pedal Organ part, and
select “Str.Bass Pdl” for the Pedal Orchestral part
fig.01-09.eps
1.
Press the Pedal Organ [Pipe] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.01-10.eps
Now when you play the Pedalboard, “Pipe Org. Bs” (Pipe Organ Bass) will
be heard.
2.
Press the Pedal Orchestral [String] button (indicator lights).
Now when you play the Pedalboard, the two voices Pipe Organ Bass and
Str.Bass Pdl (String Bass Pedal) will sound simultaneously (mixed together).
Selecting Pedal Bass Voice
1 2
Normally, playing the
pedalboard will sound one note
at a time. Settings can be
adjusted to allow multiple notes
to be played on the Pedalboard
(p. 212).
If you press the Pedal [To
Lower] button (indicator lights
→ p. 165) or [Bass Split] button
(indicator lights
→ p. 163), the
Pedal Bass voice can now be
played by the Lower keyboard,
not by the Pedalboard.
The Pedal Organ part has an
[Octave Up] button. Notice that
when the [Octave Up] button is
on, the selected Pedal Bass
voice will sound an octave
higher.
AT-900_e.book 52 ページ ２００８年９月１６日 火曜日 午前１０時３８分