Roland Atelier AT900 - Manual (Page 242)

240
Various Other Settings
3. Touch .
The Video screen appears.
4. Touch .
The Video Option screen appears.
5. Touch the NTSC/PAL setting to switch between
“NTSC” and “PAL.”
6. Touch .
This setting remains stored in memory even while power is
turned off.
This setting changes the proportional relationship between the
vertical and horizontal dimensions of the image that is output
from the ATELIER to the television or display connected to the
Video Output [Video] jack.
The ATELIER’s display screen has a horizontal/vertical ratio of
16:9. Televisions and displays have screen sizes with a
horizontal/vertical ratio of 4:3 or 16:9 (wide screen).
You can’t change the aspect ratio of the image that is output
from the Video Output [RGB] connector to an external
display or a television.
If you’re viewing images on a television or display connected
to the Video Output [Video] jack, change this setting as
appropriate for the aspect ratio of the television or display
you’ve connected.
1. Touch on the Main screen.
The System screen appears.
2. Touch .
fig.00-38.eps
3. Touch .
The Video screen appears.
Setting
NTSC, PAL
NTSC and PAL
Both of these are the names of color television broadcast
standards.
NTSC is used in North America and a number of other
countries including Japan. PAL is used in many regions,
including Europe and Asia.
Selecting the Aspect Ratio of the Video
Output
NOTE
AT-900_e.book 240 ページ ２００８年９月１６日 火曜日 午前１０時３８分