Roland Atelier AT900 - Manual (Page 231)

229
Various Other Settings
Various Other Settings
You can change the color and pattern for the main screen’s
background.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Main
Background.
fig.09-44.eps
3. Touch the Main Background setting.
4. Touch < > < > to change the setting.
fig.10-13.eps
5. Touch .
The System screen appears.
6. Touch on the System Screen.
The main screen appears with the selected background.
This setting remains stored in memory even while power is
turned off.
In some cases, when CD Drive is connected to the Ext Drive
connector, it may take longer for data to be loaded, or data
may fail to be loaded successfully. If this occurs, you may be
able to solve the problem by changing the Ext Drive
connector.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Ext Drive
Mode.
fig.09-44.eps
3. Touch the Ext Drive Mode setting to switch
between “MODE 1” and “MODE 2.”
Each time you touch the Ext Drive Mode setting, it will
alternate between “MODE 1” and “MODE 2.”
4. Touch .
5. Turn on the power once again.
Switching the Background of the Main
Screen Changing the Ext Drive Connector
Setting
Setting
MODE 1, MODE 2
AT-900_e.book 229 ページ ２００８年９月１６日 火曜日 午前１０時３８分