Roland Atelier AT900 - Manual (Page 29)

27
Before You Start Playing
Before You Start Playing
2. Pass the cable through the hole from which
you removed the cover.
* The side boards of the stand have grooves that allow the cables to be
routed inside. You may use these if desired. For details, refer to the
separate leaflet “STAND ASSEMBLY.”
The bench seat can be opened, and sheet music and other
items can be stored inside.
Caution When Using the Bench
fig.00-31.eps
• When opening/closing the seat, be careful not
to pinch your fingers.
fig.00-36.eps
You can restore all of the settings stored in the ATELIER to what
they were when the instrument shipped from the factory. This
function is called “Factory Reset.”
1. Touch on the Main screen.
The System screen appears.
fig.00-37.eps
2. In the System screen, touch to open
the Utility screen.
fig.00-38.eps
3. In the Utility screen, touch .
fig.00-39.eps
About the Bench
Cable pass-thru cover Cable pass-thru cover
Cable pass-thru
AT-900
AT-900C
Restoring All the Factory
Default Settings
AT-900_e.book 27 ページ ２００８年９月１６日 火曜日 午前１０時３８分