Roland Atelier AT900 - Manual (Page 168)

166
Recording/Playing Back What You Play
The internal composer can record performances and play
back commercial SMF music files.
The composer can be used in the following two ways.
Using the Panel Composer Buttons
fig.07-01.eps
Touching in the Main Screen to
Open the Rec/Play Screen and Using the Rec/
Play Screen’s Composer Buttons
fig.07-04.eps
Button Description
Reset Returns you to the beginning of the song.
Play/Stop
Starts and stops playback of the song.
After the [Rec] button has been pressed,
putting the composer in record standby
mode, recording then starts when the
[Play/Stop] button is pressed.
Rec
The unit switches to record standby mode.
* In record standby, the [Rec] button is
lit, and the [Play/Stop] button flashes.
Song
The Song Select screen appears in the
display.
Registration
The Registration Load screen appears in
the display.
Demo The Demo screen opens.
Button Description
Track
Rhythm
Accomp
Bass
Lower
Upper
Solo
Control Buttons for tracks to which performances
are recorded light up.
A lighted button can be toggled between
lighted and unlit by pressing it. Tracks
are muted when the button’s light is off.
→ For more about the track buttons, refer
to p. 167.
Reset Returns you to the beginning of the song.
Stop Stops playback of the song.
Play
Starts playback of the song.
After has been touched to put the
composer in record standby mode,
recording then starts when you touch
.
Rec
The unit switches to record standby
mode.
* In record standby, is lit, and
flashes.
Bwd Rewinds the song.
Fwd Fast forwards the song.
You can toggle between display of the
track buttons, the bouncing ball, or the
track mute buttons by touching the
button.
The Notation screen appears in the
display.
The Utility screen for the Composer is
displayed.
The VIMA TUNES screen is displayed.
This button is shown only in the Rec/Play
(record/play) screen.
AT-900_e.book 166 ページ ２００８年９月１６日 火曜日 午前１０時３８分