Roland Atelier AT900 - Manual (Page 154)

152
Applying Various Effects to the Sound
By changing the reverberations of the notes, you can enjoy the
atmosphere of performance in a wide variety of different
locations.
1. Touch on the Main screen.
fig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch .
The Effect screen appears.
fig.05-17.eps
3. Touch < > < > to display the Reverb Type.
4. Touch the value setting buttons for Reverb
Type to adjust the setting.
The following screen appears.
fig.05-18.eps
5. Touch < > < > to change the setting.
It is not possible to modify the delay time (delay interval)
when “DELAY” or “PAN DELAY” is selected.
6. Touch .
Changing the Reverb Type
Display Description
ROOM 1
Simulates the reverb of a conference
room
ROOM 2
Simulates the reverb of a
performance lounge
ROOM 3
Simulates the reverb of a large, open
room
HALL 1
Simulates the reverb of a large
concert hall
HALL 2
Simulates the reverb of a small
concert hall
SMALL
CHURCH
The reverberation of a small church
LARGE
CHURCH
The reverberation of a large church
CATHEDRAL The reverberation of a cathedral
PLATE Applies a bright, metallic reverb
DELAY
An echo-like sound repeated several
times
PAN DELAY
Similarly to the above but where the
sound is panned between the left and
right speakers
NOTE
AT-900_e.book 152 ページ ２００８年９月１６日 火曜日 午前１０時３８分