Roland Atelier AT900 - Manual (Page 130)

128
Using the Registration Buttons
Registrations from USB memory or floppy disk can be copied to User memory.
If a Registration saved in USB memory or on a floppy disk is stored in User
memory, the stored Registration data will not disappear even when you turn
off the power. It is convenient to load frequently-used Registration into User
memory.
Registrations saved in User memory can also be copied to USB memory (p.
130).
Copying Registration from USB Memory to User
Memory
1.
Connect the USB memory to the External Memory
connector.
2.
Touch on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
3.
Touch .
The Registration File Edit screen appears.
fig.03-25.eps
Copying Registrations
If you want to copy Registration
from floppy disk, connect the
floppy disk drive to the Ext
Drive connector.
You can also open the
Registration Load screen by
pressing the [Registration]
button.
AT-900_e.book 128 ページ ２００８年９月１６日 火曜日 午前１０時３８分