Roland Atelier AT900 - Manual (Page 229)

227
Various Other Settings
Various Other Settings
* When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4. Touch .
This setting remains stored in memory even while power is
turned off.
When you use the MIDI connectors or the USB connector of
the ATELIER to transmit musical data to external devices, for
each keyboard (Upper, Lower, and Pedal) you can specify the
channel on which your playing will be transmitted as MIDI
messages.
For details refer to “Connecting MIDI Devices” (p. 248).
1. Touch on the Main screen.
The System screen appears.
fig.09-24.eps
fig.09-30.eps
fig.10-11.eps
2. Touch the part to change the MIDI Transmit
Channel.
The Control part transmits Expression pedal data and PC
numbers.
3. Touch < > < > to change the setting.
fig.09-31-a.eps
4. Touch .
MIDI messages for the Solo part will be transmitted only
when the Solo [To Lower] button is ON.
Selecting the MIDI Transmit Channel
Menu Part
Tx MIDI Ch. Upper Upper
Tx MIDI Ch. Lower Lower
Tx MIDI Ch. Pedal Pedal
Tx MIDI Ch. Solo Solo
Tx MIDI Ch. Drums Drums/SFX
Tx MIDI Ch. M.Perc Manual Percussion
Tx MIDI Ch. Ctrl Control
Setting
1–16
NOTE
AT-900_e.book 227 ページ ２００８年９月１６日 火曜日 午前１０時３８分