Roland Atelier AT900 - Manual (Page 101)

99
Using Rhythm Performance
Using Rhythm Performance
User memory (p. 84) already contains Rhythms, but you can replace these
Rhythms with Rhythms from USB memory or floppy disk. Rhythms copied from
the USB memory into User memory will not be lost even if the power is turned
off. It is convenient to copy frequently-used Rhythms into User memory.
Rhythms that you’ve created and saved in User memory can also be copied
to USB memory (p. 101).
Copying Rhythms from USB Memory to User Memory
1.
Connect the USB memory to the External Memory
connector.
2.
Touch on the Main screen.
The Rhythm screen appears.
fig.02-09.eps
3.
Touch < > (Utility) on the Rhythm screen.
The Utility screen appears.
fig.02-10.eps
Copying Rhythms
If you want to copy Rhythms
from floppy disk, connect the
floppy disk drive to the Ext
Drive connector.
AT-900_e.book 99 ページ ２００８年９月１６日 火曜日 午前１０時３８分