Roland Atelier AT900 - Manual (Page 252)

250
Connecting with External Device
Connecting a Television
Making the Connections
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1. Turn off the power to the ATELIER and the
television to be connected (p. 24).
2. Connect your television to the ATELIER.
Use a video cable (sold separately) to connect the
ATELIER Video Out Video jack with the television’s video
input jack.
3. Switch on the ATELIER (p. 24).
4. Switch on the connected display.
5. (As necessary) Specify the television output
format (p. 239).
6. Specify the aspect ratio (ratio between width
and height) for your television (p. 240).
Switching Off Your Television or
External Display
You must turn off the power of the television or external
display in the following order.
1. Minimize the volume of the ATELIER (p. 24).
2. Switch off the connected television or display.
3. Switch off the ATELIER (p. 24).
Television
Video Cable
(commercial available)
NOTE
AT-900_e.book 250 ページ ２００８年９月１６日 火曜日 午前１０時３８分