Roland Atelier AT900 - Manual (Page 241)

239
Various Other Settings
Various Other Settings
5. Touch .
A screen like the one below appears, allowing you to
specify a name for the folder.
If you’re copying all songs and Registrations to USB
memory, a folder will be created in the USB memory,
and the data will be saved in this folder.
6. Touch the character select button ( )
to switch among uppercase/numbers.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase
→
numbers → uppercase...
7. Touch the screen to specify the desired
character.
The following characters can be selected.
To cancel the operation, touch .
8. When you’re done making the settings, touch
.
The folder name has been assigned.
The following screen appears.
9. Touch .
The data from floppy disk will be copied to USB
memory.
When the copy is completed, a message will indicate
“Completed,” and you will return to the System screen.
If the floppy disk drive or USB memory is not
connected correctly, a screen like the following will
appear.
fig.++-+++
Set the ATELIER’s television format to match the television
format of the television, video camera, or DVD player that is
connected.
Change this setting if the image is not correctly shown on the
television, or if the image from your video camera or DVD
player is not displayed correctly.
Set this to the broadcast format used in your area.
1. Touch on the Main screen.
The System screen appears.
2. Touch .
fig.00-38.eps
Uppercase
A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z
Symbols _ 0 1 2 3 4 5 6 7 8 9
Deletes a character.
Move the cursor (the symbol that
indicates the location at which
characters will be input) to left or right.
Video-related Settings
Specifying the Television Format
NOTE
AT-900_e.book 239 ページ ２００８年９月１６日 火曜日 午前１０時３８分